TX LBZ checking in

[DanielLBZ]

Been shopping on here for a while but just registered on here. Got an 06 LBZ that I've had for a few years. I love shopping at this store, you guys keep kicking ass!

[Mike D]

Thank you and welcome to the forum.

[8aford97@gmail.com]

Welcome and always good to see another LBZ guy

[DanielLBZ]

Thanks guys! I'll never sell this one, too much money, blood, sweat and tears in it! So far I've done:

BDS lift on 20x9 moto metals with 35x12.50's
Kryptonite tie rods
New Timkin front hubs
Fass titanium 150
Filter head deleted
Egr deleted completely
Pcv re route
Ported rail fitting
Rail plug instead of shimmed
Lb7 passenger up pipe
3 in down pipe
4 inch exhaust to a 7 in tip
Cts monitor
Grizzly locker in the rear with all new bearings
Custom tune that was on the truck when I got it
Amp research steps

Thats all that I can think of off the top of my head I'm sure I'm forgetting some things. I'm ordering the following this week to finish the front end:

Kryptonite SS center link with inners
Cognito pisk
Kryptonite idler side package
Moog pitman arm
New steering gear box
Cognito uniball uca's with dual shock mounts

Hopefully that will take the foot of play I have in the steering away. The next items on the list are:

Built trans
EFI live
Danville 68mm stg2r
Injectors
Dual cp3
Y bridge and pipes

After that I'll be done for a while until I can afford to build the bottom end in like 10 years lol

[DMAXDR]

Welcome and you'll be very impressed at the way the steering will feel after the parts are on. Like the to do list as well.

[8aford97@gmail.com]

Thanks guys! I'll never sell this one, too much money, blood, sweat and tears in it! So far I've done:

BDS lift on 20x9 moto metals with 35x12.50's
Kryptonite tie rods
New Timkin front hubs
Fass titanium 150
Filter head deleted
Egr deleted completely
Pcv re route
Ported rail fitting
Rail plug instead of shimmed
Lb7 passenger up pipe
3 in down pipe
4 inch exhaust to a 7 in tip
Cts monitor
Grizzly locker in the rear with all new bearings
Custom tune that was on the truck when I got it
Amp research steps

Thats all that I can think of off the top of my head I'm sure I'm forgetting some things. I'm ordering the following this week to finish the front end:

Kryptonite SS center link with inners
Cognito pisk
Kryptonite idler side package
Moog pitman arm
New steering gear box
Cognito uniball uca's with dual shock mounts

Hopefully that will take the foot of play I have in the steering away. The next items on the list are:

Built trans
EFI live
Danville 68mm stg2r
Injectors
Dual cp3
Y bridge and pipes

After that I'll be done for a while until I can afford to build the bottom end in like 10 years lol

Your LBZ will be sitting pretty after the front end is done and the wish list is done. Then you can start saving for a motor build. Lol

[Mike D]

Very nice rig you have there.

[DanielLBZ]

Thanks guys and yeah the motor build is wayyyyy down the road lol I work in the oilfield but that's still a big chunk of change! I'm trying to get it done before I have kids though.

[DirtyMax63]

Hello from Utah

[8aford97@gmail.com]

Thanks guys and yeah the motor build is wayyyyy down the road lol I work in the oilfield but that's still a big chunk of change! I'm trying to get it done before I have kids though.

Yeah I highly suggest getting it done before kids. Once they are here it's all about them. I'm sure you know

[DanielLBZ]

Oh I do, I'm about to be 30, have dated girls with kids and such and realized that if I want any kind of toys I have to obtain them prior and fight like hell to keep them lol