NeverEndingRacing

[DirtyMax63]

This is cool you guys put up a page for your sponsored trucks, Thanks.
I've been running Kyrptonine front end parts for two years and would like to tell everyone how well they perform in a high horse power boost launch and sled pulling.
Not once did they give out or let that frontend toe in. held up to 817hp on the track and in the dirt. Driving to and from both the truck drove like it was new. Great products and service.

[DmaxStoreAustin]

[QUOTE=DirtyMax63;n5222]I know I haven't posted anything on here for a while, but I'll give you a look at the almost completed LB7. I think I have been able to get most of the personal things taken care of and I'm at the point to put trans and motor in the truck after the holidays.
I want to thank Mike and everyone at the Dmax store for all the help and support, also all the great products they have. everything has held up and went the test.
Thanks everyone and have a very HAPPY and ENJOYABLE 4th of July.
Be safe[/QUOTE]

Motor is looking good!! Glad we are able to help you out. It's awesome to see follow up posts like this. Have a great 4th!

[DirtyMax63]

I know I haven't posted anything on here for a while, but I'll give you a look at the almost completed LB7. I think I have been able to get most of the personal things taken care of and I'm at the point to put trans and motor in the truck after the holidays.
I want to thank Mike and everyone at the Dmax store for all the help and support, also all the great products they have. everything has held up and went the test.
Thanks everyone and have a very HAPPY and ENJOYABLE 4th of July.
Be safe

[DirtyMax63]

Ad the first of many parts showed up from Suncoast Performance today. Can't wait to start putting the tranny together. And yes it will have all the billet goodies and mods.
Taking the case down and having it powder coated the illusion sour apple.
I have heard rumor that if you powder coat the case it holds in a lot of heat? Anyone know about this??

[DirtyMax63]

A big hello to everyone. I want to start off by letting anyone who is following me on facebook that my personal page has been hacked, so please watch out for friend requests today on forward.
Now I should be posting an update on tranny parts about the first of next week. I've taken the case down for powder coating and hoping the pumps will be done in a few weeks or sooner.
I know it's been a little longer than I thought to get back on the track, but it shouldn't be to much longer.
Thanks again to Mike and the crew of the Dmaxstore for their help and quality parts. Keep up the great work.
Karl

[DirtyMax63]

Well I need to say hello to everyone and thanks for all your help. I just made it back home a few days ago and started to do some more work on the truck.
I've sent my CP3 pumps to Industrial Injection to have them made into 12mm 120's.Ordered clutch kit and billet shafts for sun coast performance. Hoping I'll be able to work on my truck for a while. Unless needed to help my friend with her mom.
Thanks again to Mike and crew at the Dmaxstore. And to Brett, Randall and Anthony at Industrial Injection.

[DirtyMax63]

Thanks Mike. Little longer to get it finished up, but my friends mom has sure needed the extra help.

Sent from my SM-G530T using Tapatalk

[Mike D]

Man sounds like it's going to be a good spring for you Karl. That's a heck of a project.


Sent from my iPhone using Tapatalk

[DirtyMax63]

[IMG]https://forum.dmaxstore.com/filedata/fetch?filedataid=877[/IMG][IMG]https://forum.dmaxstore.com/filedata/fetch?filedataid=878[/IMG][IMG]https://forum.dmaxstore.com/filedata/fetch?filedataid=879[/IMG][IMG]https://forum.dmaxstore.com/filedata/fetch?filedataid=880[/IMG]

Sent from my SM-G530T using Tapatalk

[DirtyMax63]

Need to add an update. Injectors are here and looking good Apex 14's 225% over. Was running Apex 5.5 about 118 % over. Still helping my friend with her mom's medical needs, but looking like May on the track this year.

Sent from my SM-G530T using Tapatalk

[DMAXDR]

Can't wait to see you run!

[Mike D]

Thanks for the update Karl. That's going to be one sweet ride. 👍


Sent from my iPhone using Tapatalk

[DirtyMax63]

I would like to give you all an update of what's been going on on my truck build for this year. I'm very close to being done, but have had to put 5hings on hold for the last 3 plus months. I've been helping a very close and life long friend with some family medical issues
We are close to hopefully have them resolved and thinking I should be back to putting this beast back together. I hope you will all understand that this must and should be a priority for me at this time.
I would like to thank Mike for all his help and support over the last couple of years, as well as everyone at the shop for all of their help and advice as well. Hope to start posting more pictures soon.
Thanks Karl

[DirtyMax63]

Thanks again Mike for everything and the top quality parts you guys have for Dmax trucks.

Sent from my SM-G530T using Tapatalk

[Mike D]

Can't wait to see that truck in action bud 👍 keep us posted.


Sent from my iPhone using Tapatalk